SignCade Frame

• Height 45”, width 25” weight 8.5 lbs each
• Display area 24” x 36”
• Add 5 pounds of sand per side for added stability (funnel included)
• Recessed display area helps protect the sign from weather
• Patented locking hinge keeps Signcade open
• Made from high density polyethylene. No discoloration or maintenance
• Attractive, lightweight, durable and portable
• Change signs in seconds with no hardware
• No clips, bolts, latches or added parts
• Stackable lugs for easy storing and transport, signs will not slide
• Available in white and yellow

Includes a 1/2 hour of design time. Additional time will be billed at $50/hour.

$290		Fill with sand and use for most outdoor applications. Patented locking hinge keeps the Signcade open, includes free funnel and 2-sided banner and design.  Available in white or yellow.

Sidewalk Frame

Holds a 36” x 29” vinyl banner with two grommets at the top and a pole pocket at the bottom to accommodate a one inch pole.
• Includes easy to follow instructions
• 48” tall in white only

   Includes a 1/2 hour of design time.  Additional time will be billed at $50/hour.

$300		Perfect for marking entrances, ministry areas, refreshments, etc. for portable churches, includes 2-sided banner with design.

Spring Frame

• Overall frame size 291/8" x 53"
• Aluminum construction
• Spring mounted frame flexes during windy conditions
• Quick assembly –only 6 fasteners
• Holds a 24" x 86" vinyl banner (24" x 43" on each side)

Includes a 1/2 hour of design time.  Additional time will be billed at $50/hour.

$320		Perfect for marking entrances, ministry areas, refreshments, etc. for portable churches, includes 2-sided banner and design.

TriFrame Portable Banner System

Perfect for churches meeting in schools or temporary locations, or other applications where you need temporary signage but you don't want to drive posts or dig holes every time.

With the TriFrame System, you just install in-ground sleeves (2' in the ground) and leave them. Installation will require a heavy-duty post driver. To install your banner frame, just slide the posts over the in-ground sleeve and tighten set screw. The TriFrame Portable Banner System can adjust for banners from 6' wide to 10' wide x up to 4' tall and will hold up to 2 banners total.

$199		Includes 3-6' Galvanized posts with set screw, 2 galvanized telescoping (6'-10') braces and 3 7/8" x 34 1/4" in-ground stakes.*
$550		Custom banners for TriFrame System: Includes 2 custom designed 10' X 4' Banners.  Includes a 1/2 hour of design time.  Additional time will be billed at $50/hour.
*Banners not included.

EZ-Banner System

Similar to the TriFrame System but made for single banners.

54" or 72" high, telescopes from 6' to 10' wide. Includes white powder coated brace bands with nuts and bolts. Use a banner with a pole pocket across the top to accommodate a 1 1/2" pole for installation. Grommets recommended in bottom corners to attach banner to upright with zip ties. Install over Tee Posts. Tee Posts are 72" tall before installation and 56" visible after installation. 54" kits are for banners up to 52" tall (2" above ground). 72" kits are for banners up to 70" tall (2" above ground). Banners can be shorter to be higher above the ground.

$199		Includes brace bands with nuts and bolts, PVC plastic pipe uprights that cover steel tee posts.  *
$280		Custom designed 10' X 4' Banner for EZ-Banner System. Includes a 1/2 hour of design time.  Additional time will be billed at $50/hour.
*Banners not included.